Managing overtime on Eurécia
This article is intended for:
Relevant modules:
Would you like an automatic process to be triggered whenever an employee works outside the working hours defined on their record?
To automate the management of overtime and, where applicable, the premiums to be applied, the Eurécia platform provides a management console divided into several steps.
This article focuses on configuring overtime management (excluding special time) to help you understand how to adapt your company's practices in Eurécia.
📖 In this article:
Overtime profiles
Access: New Admin Area > Time & Activities > Overtime profiles
They allow you to group the various overtime rules according to your employees' profiles.
Why?
- Avoid multiplying the configuration: there is no need to reconfigure the rules for each schedule created.
- Reduce the risk of errors linked to the multiplication of rules and make checking easier.
- Make changes easier: for example, if the valuation is changed, there is no need to update all working schedules, only the relevant overtime profile.
Practical examples
For example, we could have:
- A “Daily package” profile, with no overtime rules
- A “Manager” profile with type A overtime rules
- A “Non-manager” profile with type B overtime rules
- An “Annualisation” profile with specific annualisation rules
Anything is possible! It is up to you!
How?
You can create new overtime profiles by clicking “Add a profile”, or modify an existing profile, from New Admin Area > Time & Activities > Overtime profiles:
You can then link this profile to different working schedules by simply selecting them and saving:
You can then configure your overtime rules by following the rest of this article, or access a more detailed article here: Configuring overtime, premiums and other special time.
Warning!
For our existing customers, overtime profiles have been created for you based on the rules already configured in each working schedule:
- The rules were exactly the same for several schedules: a single overtime profile was created.
- The rules were different (including the code): several overtime profiles were created.
Overtime
Access: New Admin Area > Time & Activities > Overtime profile > General tab > Weekly overtime section
This feature allows you to record hours worked outside the defined working schedule for the employee, as specified on their record.
These so-called weekly overtime hours can be paid, subject to a premium and/or used to add to a time-off-in-lieu balance.
Similarly, if hours have not been worked, they can be deducted from this same type of balance.
You can base the calculation of these hours on the theoretical working schedule, the working schedule taking leave and absences into account, or a fixed value, or you can retain a threshold that must not be exceeded.
A point about terminology
- “Fixed number of hours” is used to define the number of hours from which the overtime calculation should be triggered.
- “Weekly theoretical” refers to the working schedule, after deducting any leave days, absences and bank holidays in a given week (provided that they are configured to appear in timesheets).
- “Schedule theoretical” is based on the working schedule only.
- “No transfer”: does not offer a transfer when the time/activity sheet is approved; this allows you to define specific time slots that will be prohibited when submitting exceptional work requests.
- “Automatic transfer”: automatically transfers the hours to the balances when time/activity sheets are approved.
- “Manual transfer”: allows you to manually transfer the hours to the appropriate balance and in a controlled quantity, either in the time sheet or in the dedicated overtime management interface.
Warning!
The deducted absences are those that are not counted as worked and must be deducted from the theoretical working time. This information is defined within the absence type.
Choosing the source
You choose which information the overtime will be calculated from, from 3 options:
- Time sheets (only available if a user is linked to a Time & Activities profile with a Time tab): if overtime must be calculated from the “Time tracking” tab.
- Activity sheets (only available if a user is linked to a Time & Activities profile with an Activity tab): if overtime must be calculated from the “Activity tracking” tab.
- Schedule: if overtime must be calculated from the team schedule (only available if the Schedule module is enabled).
Overtime rules
In the “Weekly overtime” section, click the “Add a rule” button to create a rule for calculating and transferring overtime:
- Enter the “Code”: this allows transfers to be tracked (e.g. HS125, for overtime with a 25% premium), particularly in time and activity sheets and payroll exports.
- In the “Number of hours worked” section, select:
- “Less than”
- “More than”
- “Between”: another drop-down list allows you to define a reference time range — the hours will be calculated when the number of hours worked during the week falls between the two defined thresholds.
- In the following drop-down menus, select “Fixed number of hours”, “Weekly theoretical” or “Schedule theoretical”.
- If “Fixed number of hours” is selected, define the number of hours worked from which overtime will be calculated.
Configuration examples
- Schedule theoretical (counting hours negatively):
- If the theoretical schedule is 35 hours,
- The hours recorded and triggering a process will be those below 35 hours.
- Weekly theoretical (counting hours negatively):
- If the theoretical schedule is 35 hours,
- There is a day of paid leave during the week that is not counted as theoretical working time (a 7-hour day),
- Then the weekly theoretical is 28 hours,
- Therefore, the hours recorded as overtime for this week will be those below 28 hours.
- Weekly theoretical + 4 hours (from 00:00):
- If the theoretical schedule is 35 hours,
- There is a day of paid leave during the week that is not counted as theoretical working time (a 7-hour day),
- Then the weekly theoretical is 28 hours,
- Therefore, the hours recorded as overtime for this week will be those above 32 hours (28 hours + 4 hours).
- Between weekly theoretical + 4 hours and weekly theoretical + 8 hours:
- If the theoretical schedule is 35 hours,
- There is a day of paid leave during the week that is not counted as theoretical working time (a 7-hour day),
- Then the weekly theoretical is 28 hours,
- Therefore, the hours recorded as overtime for this week will be those between 32 and 36 hours.
- Fixed number of hours: 35 hours
- Regardless of the number of theoretical hours in the working schedule or week.
- Regardless of whether there is a day of paid leave.
- The hours recorded and triggering a process for this week will be those below or above 35 hours (depending on < or >).
- Fixed number of hours: 44 hours
- Regardless of the number of theoretical hours in the working schedule or week.
- Regardless of whether there is a day of paid leave.
- The hours recorded and triggering a process for this week will be those below or above 44 hours (depending on < or >).
- Between a fixed number of hours of 35 hours and a fixed number of hours of 39 hours:
- The hours recorded and triggering a process for this week will be those between 35 and 40 hours.
- Between weekly theoretical + 0 hours and a fixed number of hours of 35 hours:
- If the theoretical schedule is 35 hours,
- A day of paid leave during the week is not counted as theoretical working time (a 7-hour day),
- Then the weekly theoretical is 28 hours,
- Therefore, the hours recorded as overtime for this week will be those between 28 and 35 hours.
Note: this list is not exhaustive: use the drop-down menus to select the procedure corresponding to your company and the working schedule to be configured.
Transfer types and the target
You determine how and where transfers should be carried out:
- Choose the transfer type: “No transfer”, “Automatic transfer” or “Manual transfer”.
- Choose the “Target”, that is, the “balance” to which the hours should be transferred (except when “No transfer” has been selected). There are two types of targets:
- Balances originating from “Leave and absence types” (e.g. Time off in lieu).
- A “Payroll” field for managing hours that must be paid.
- For each balance, if required, enter the multiplier to be applied (e.g. 125%, 150%, etc.).
- Define a maximum number of hours that the target balance cannot exceed (including the premium) by entering the “Maximum number of hours up to” field.
Example:
If the field is completed in this way, the “Time off in lieu” balance will have a maximum balance of 14 hours.
This means that the employee can have a maximum of 14 hours “in stock” (called “balance as of today” in Leave & Absence balances).
In this case, you can define a 2nd target to recover any surplus hours to be transferred so that the employee does not lose them, even when transfers are automatic. The order in which the targets are created is therefore decisive.
- Click “Add a target” and repeat the previous operations if required.
- When configuring successive time ranges, repeat the end boundary of the 1st range as the start boundary of the 2nd range to ensure continuity in the calculation of overtime.
Example:
1st calculation rule at 25%, enter: 125% (from 35:00 (exclusive) to 39:00 (inclusive))
2nd calculation rule at 50%, enter: 150% (from 39:00 (exclusive) to 44:00 (inclusive))
- Save the profile.
Keywords: hour · hours · overtime · OT · weekly · profile · profiles · weekly · premium · with · without · premium · transfer · payroll · manual · rule · rules · calculation · pay · schedule · work · overtime management · number of OT hours · leave balances · calculation of actual time worked · theoretical hours at 100% or 125% or 150% or 200% · time · additional worked time · deducted absences
Comments
Article is closed for comments.