Manage the training plan in Training Management (new)
This article is intended for:
Related module:
Creating a training plan helps prepare for the coming year (or the desired period). It identifies the training to be implemented, the employees concerned, as well as the forecast costs and available funding.
In Eurécia, the training plan is built progressively:
- The plan is the basis (e.g. Training plan 2026).
- It groups together one or more training actions (e.g. “Managing remotely” training).
- Each action can be divided into one or more sessions, organised on specific dates (e.g. a March session for the sales team, an April session for managers).
Contents of this article:
- Create the training plan
- Add training actions to the plan
- Set a budget per action
- Add sessions to training actions
- Enrol employees in training sessions
- Synchronisation with Leave & Absence
- Manage a training session and inform enrollees
- Close or reopen a session
- Set a budget per session
- Include salary costs in the budget
- Manage the plan's overall budget
- Cancel a training action
- Reactivate a cancelled action
- Export the plan
Once created, the training plan can be completed directly by manual entry (as detailed below), or populated from training requests according to the procedures described in this article 😊
Create the training plan
Access: Training Management > Training plan
Click “Create”, enter the plan name and period, then click “Continue”:
The next page lets you define the overall budget allocated to the plan, as well as the cost and funding types to use:
The allocated budget is the total amount dedicated to the plan. If it is not yet known, it can be entered later. Cost and funding types can be defined now — they will then be suggested automatically when actions and sessions are created.
Note: the training cost cost type is always present and cannot be changed. The other types are fully customisable.
🆕 Salary costs: this is also where you can enable salary costs, which automatically adds the time employees spend in training to the budget. It is disabled by default and can also be enabled later on an existing plan. Full details are available in the Include salary costs in the budget section.
Once the settings are complete, click “Add plan”:
The plan is created 🎉 You can now add actions and/or sessions, or do so later as required.
Add training actions to the plan
A training action is a global programme with a specific learning objective. It can be divided into several sessions on different dates, for different groups.
From the Training plan menu, open the desired plan, then click Add:
Enter the information relating to the action:
Note
- Fields marked with a red asterisk are mandatory to validate this first section.
- Changes made to the action do not affect the existing training in the catalogue — they apply only to the action created in the plan.
Once the mandatory fields have been completed, click Continue to move to the budget section:
At this stage, you can choose whether training costs and funding are managed per action or per session. When managed per action, the training cost can be entered directly. The plan's remaining overall budget is displayed on the right and updated automatically:
Once the budget is complete, click Continue. You can link employees immediately (select “Yes”) or later (select “No”), then click Add action:
Edit a training action
Adjustments can be made at any time. Click the edit icon associated with the relevant action:
Transfer the action to another plan
From the action, open the edit menu, then select “Transfer to another plan”:
Choose the destination plan, then click “Move”.
⚠️ Warning: transferring recalculates the original plan's budget and permanently deletes the costs and funding of the transferred action. They must be entered again in the new plan.
Set a budget per action
When creating an action, choose between managing the budget per action or per session:
When the budget is managed per action, the training cost can be entered when the action is created. Funding can then be completed in the “Training action budget” section once the action has been created:
The total is updated instantly as soon as the amounts are entered:
Add sessions to training actions
A training session is the practical implementation of an action, organised for a given group on specific dates.
To add a session, open the action from the plan, expand the Sessions section, then click Add:
Enter the session information and dates, then click Continue:
The session is created 🎉 Employees can be linked to it at any time.
Enrol employees in training sessions
When adding the session, choose whether employees are linked immediately (“Yes”) or later (“No”):
When employees are linked, you can decide whether to send them a notification upon enrolment by ticking the relevant box:
Once the operation is complete, click “Add session”. The session status is then set automatically according to the dates: Planned (future dates), In progress (started, end date not reached), Completed (past dates) or To be closed (past dates, awaiting closure by the administrator).
Note: if salary costs are enabled on the plan, they are calculated automatically for each employee as soon as they enrol in the session. See the Include salary costs in the budget section.
Synchronisation with Leave & Absence
As soon as an employee enrols in a session, an absence of the “Training” type is automatically created in their Leave & Absence schedule for the relevant dates. Conversely, cancelling an enrolment or session automatically deletes this absence. No more duplicate entry between the two modules 🎉
🚩 Prerequisite: this synchronisation only works if your company has both modules active (Training Management and Leave & Absence), and if the “Training” absence type is correctly configured in L&A using the “Used when submitting leave in the training module” option. Without this setting, synchronisation has no actual effect on the schedule.
How it works
When an employee enrols, the system checks whether an absence already exists on the session dates:
- No existing absence → the “Training” absence is created directly in the employee's schedule.
- Absence already present → enrolment remains effective, but the administrator is alerted through their notifications about a date conflict. They must then decide what to do (cancel the existing absence, change the session date, etc.).
Note: enrolment in a training session is always effective, whether or not a date conflict is detected. Synchronisation never blocks the training.
Effect of each action on the schedule
| Action in the Training Management module | Effect on the Leave and Absence schedule |
|---|---|
| Enrolling an employee in a session | Creation of an absence for each session date |
| Creating a session with existing enrollees | Creation of absences for all enrollees |
| Reactivating a cancelled session | Re-creation of absences |
| Adding a date to an existing session | Creation of the absence for the new date |
| Unenrolling an employee | Deletion of their absences for this session |
| Moving an employee to another session | Deletion of the old absences + creation of the new ones |
| Moving a session date | Deletion of the old absence + creation on the new date |
| Cancelling or deleting a session | Deletion of all associated absences |
Half-day training
Training may last only half a day. The absence then covers only the relevant time slot:
| Training time | Absence created |
|---|---|
| Ends before 12:00 | Morning only |
| Starts after 12:00 | Afternoon only |
| Spans midday | Full day |
Special cases
- A period of several days consisting of half-days (e.g. “every morning of the week”) generates one separate absence per day.
- Two training sessions on the same day (one in the morning and one in the afternoon) generate two separate half-day absences, which are not merged.
Notifications in the event of an error
When everything works correctly, synchronisation is silent: no notification is sent. If it fails, the company's active administrators receive a notification on the application home page, with a direct link to the relevant session. A synchronisation failure never blocks enrolment in the training: enrolment is maintained and the administrator is notified so they can act manually.
Important limitations
- No management of cumulative conflicts: the case of an employee with a “cumulative” absence on the same dates is not handled automatically
- Delayed consistency in the event of an incident: the absence may be created with a slight delay
- No retroactive synchronisation: the feature acts on events triggered after it is enabled. Past enrolments are not recalculated automatically.
Manage a training session and inform enrollees
In the session, open the “Employees in the session” section. For each employee, you can enrol them, transfer them to another session, remove them, notify them, or add an invitation (with or without notification):
When several employees are concerned, you can select all or some of the rows to apply a bulk action:
If an enrolment notification email is sent, the employees concerned will also receive an email to create an Outlook/Gmail event 😊
💡 Need to cancel an action and its sessions?
If an action needs to be suspended without being permanently deleted, you can cancel it. The history, participants and costs are retained, and all active sessions are cancelled automatically. See the Cancel a training action section for the procedure.
Close or reopen a session
Once a session date has passed, it automatically changes to the “To be closed” status. Closing is a manual action performed by the administrator.
Closing a session has two effects:
- If the training is renewable, it starts the expiry date countdown (training end date + validity period) — see the Renewable training article.
- It freezes the session information (budget, employees, etc.), which becomes read-only.
Note: a closed session can be reopened at any time to make it editable again (for example, to correct the budget or employee list). Reopening does not cancel the renewal countdown already started: the calculated expiry date remains unchanged.
What about salary costs? If salary costs are enabled on the plan, closing also freezes their amount: the hourly rate used is the one in effect on the day of closure. See the How is it calculated? section.
Set a budget per session
If the action was configured with budget management per session, this information appears in the “Training action budget” section:
Once the sessions have been created, open the desired session by clicking the corresponding row:
Complete the training cost and the various costs per employee:
Then add the funding associated with the training:
Note: cost and funding types can be adjusted when creating the plan. If necessary, they can also be changed directly from the session using the shortcut available on screen:
Include salary costs in the budget
Salary costs enable you to include the time employees spend in training in the plan budget, without any manual entry. They are calculated automatically for each employee enrolled in a session, providing a complete view of the actual cost of your training 😊
Enable salary costs
Salary costs are disabled by default. They can be enabled:
- when creating the plan, during the budget and cost type settings step;
- on an existing plan, at any time.
They can also be disabled if you no longer want to include them in the plan budget.
How is it calculated?
For each employee enrolled in a session, salary costs are calculated automatically using the following formula:
Salary cost = gross hourly rate × number of session hours
Example: an employee whose gross hourly rate is €15 attends a 9-hour session → salary cost of 15 × 9 = €135.
The gross hourly rate used depends on the session status:
| Session status | Gross hourly rate used |
|---|---|
| Session not closed | Rate in effect on the first day of the session |
| Session closed | Rate in effect on the day of closure |
Note: the salary cost amount is calculated automatically and cannot be edited manually.
Salary visibility
The calculation uses employees' salary data. If you do not have permission to view an employee's salary, the field displays “Salary not visible” instead of the amount.
⚠️ Warning: in this case, a warning indicates that the budget is incomplete. The displayed totals do not include all salary costs for the plan.
Manage the plan's overall budget
The overall budget is defined when the plan is created and remains accessible at any time from the Overall budget tab:
This tab centralises key information: planned budget, committed expenditure, forecast amounts and associated funding. It provides an overview of budget usage.
What does the overall budget contain?
The budget allocated to the plan is the overall amount available for all actions. The budget progress provides a current view of amounts spent, forecast and remaining budget, with a progress bar 😊 Costs and funding group action costs and external funding (OPCO, CPF, other), displayed separately. When salary costs are enabled, they are automatically included in the plan costs.
How is the overall budget populated?
The overall budget is updated from actions and sessions, according to the selected management mode. In each action, the “Budget spent” box lets you indicate whether the amount should be recorded as spent or kept as forecast:
When the box is not ticked, the amounts remain as forecast:
When the box is ticked, the amounts are recorded as spent and the overall view is updated:
Impact of cancellations on the budget
The costs of cancelled actions and sessions remain visible in the budget tables, but are excluded from forecast calculations while the cancellation is active. The available budget is therefore recalculated automatically.
When reactivated, the amounts are automatically added back to the forecast budget.
Cancel a training action
Access: Training Management > Training plan > [Your plan] > Action context menu
What is cancellation?
Cancellation is not deletion. The action remains visible in the plan with its complete history, participants and costs. It is simply marked with the “Cancelled” status (red tag) and becomes read-only, as do all its sessions. Permanent deletion remains available separately.
How to cancel an action
From the training plan, open the context menu for the relevant action and click “Cancel action”:
A window opens. You can enter a reason for cancellation (optional, maximum 300 characters), then confirm:
⚠️ cascading effect
Cancelling an action automatically cancels all its active sessions, applying the same reason. It is not possible to cancel an action while keeping some of its sessions active.
The action then displays the “Cancelled” tag (in red). Hover over it to view the cancellation reason, if one was entered:
What happens to a cancelled action
- It is read-only: no changes, participant enrolments or session creation are possible.
- Its costs remain visible in the budget tables, but are excluded from forecast calculations.
- It remains filterable by the “Cancelled” status in the training plan.
Participant notifications
Employees enrolled in cancelled sessions automatically receive an email and in-app notification — provided they were previously notified of their enrolment. If enrolment was completed without notification, cancellation does not trigger any communication.
💡 Find cancelled actions
Use the “Cancelled” status filter in the training plan to display only the relevant actions.
Reactivate a cancelled action
Access: Training Management > Training plan > [Your plan] > Context menu of the cancelled action
What is reactivation?
Reactivation is the reverse operation to cancellation. It returns the action to the status corresponding to its dates (To be planned, Planned, In progress…) and automatically reactivates all its cancelled sessions. The cancellation reason is permanently deleted and the costs are added back to the forecast budget.
From the training plan, open the context menu for the cancelled action and click “Reactivate action”:
A window opens. You can choose whether or not to notify participants in the relevant sessions:
Important points to know
- Cascading reactivation: reactivating an action reactivates all its cancelled sessions, without distinction. It is not possible to reactivate only certain sessions.
- Reason lost: the cancellation reason is permanently deleted upon reactivation. There is no history of previous reasons.
- Action reserved for administrators: cancellation and reactivation are not available to managers or employees.
What happens when an action is reactivated
- The action status is recalculated automatically according to its dates.
- All cancelled sessions are automatically reactivated.
- The cancellation reason is permanently deleted.
- The costs are added back to the plan's forecast budget.
- The action and its sessions are no longer read-only: changes and enrolments are possible again.
Export the plan
The export generates an Excel version of the plan, structured and reusable: ideal for sharing with stakeholders, archiving or analysing data (budgets, participants, planned actions). To export, open the relevant plan and click Export:
A confirmation window opens. Click Export to start the download:
A few moments later, the export is available in your notifications. Click it to download the complete Excel spreadsheet with all the plan data 😊
Keywords: training plan · action · session · budget · funding · employees · export · create · training management · training cost · cancel · cancellation · reactivate · reactivation · reason · status · read-only · leave · absences · synchronisation · training absence · date conflict · half-day · closure · reopening · to be closed · renewal · salary costs · gross hourly rate · salary · salary not visible · incomplete budget
Comments
Please sign in to leave a comment.